Intel® HD Graphics
Production Version 14.46.5.5361
Release Notes
May 06, 2011
Microsoft Windows* XP
Windows* Embedded Standard 2009(1)
Windows* Embedded POSReady
2009(1)
(1)These operating systems
supported for embedded designs and usage models only.
INTEL CONFIDENTIAL
INFORMATION IN THIS DOCUMENT IS PROVIDED
IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL
OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING
LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT.
UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT
DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL
PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time,
without notice. Designers must not rely on the absence or characteristics of
any features or instructions marked "reserved" or
"undefined." Intel reserves these for future definition and shall
have no responsibility whatsoever for conflicts or incompatibilities arising
from future changes to them. The information here is subject to change without
notice. Do not finalize a design with this information.
This document contains information on
products in the design phase of development.
The products described in this document may contain design defects or errors
known as errata, which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest
specifications and before placing your product order.
Intel is a trademark of Intel
Corporation in the
*Other names and brands may be claimed as the property of
others.
Copyright © 2010-2011, Intel Corporation. All rights reserved.
Date |
Driver Revision |
Description |
Build Number |
May 06, 2011 |
PV 14.46.5.5361 |
Production
Version; fully validated |
5361 |
March 02, 2011 |
PV 14.46.4.5337 |
Production
Version; fully validated |
5337 |
February 02,
2011 |
PV 14.46.3.5328 |
Production
Version; fully validated |
5328 |
January 13,
2011 |
PV 14.46.2.5323 |
Production
Version; fully validated |
5323 |
December 28,
2010 |
PV 14.46.1.5321 |
Production
Version; fully validated |
5321 |
November 18,
2010 |
PV 14.46.0.5313 |
Production
Version; fully validated |
5313 |
November 11,
2010 |
Beta
14.46.0.5312 |
Beta
Engineering Drop; not fully validated |
5312 |
October 28,
2010 |
Beta
14.46.0.5307 |
Beta
Engineering Drop; not fully validated |
5307 |
October 15,
2010 |
Beta
14.46.0.5305 |
Beta
Engineering Drop; not fully validated |
5305 |
September 23,
2010 |
Beta
14.46.0.5301 |
Beta
Engineering Drop; not fully validated |
5301 |
September 10,
2010 |
Beta
14.46.0.5298 |
Beta Engineering
Drop; not fully validated |
5298 |
August 27, 2010 |
Beta
14.46.0.5293 |
Beta
Engineering Drop; not fully validated |
5293 |
August 13, 2010 |
Beta
14.46.0.5287 |
Beta
Engineering Drop; not fully validated |
5287 |
July 30, 2010 |
Alpha 14.46.0.5283 |
Alpha
Engineering Drop; not fully validated |
5283 |
July 16, 2010 |
Alpha
14.46.0.5281 |
Alpha
Engineering Drop; not fully validated |
5281 |
July 02, 2010 |
Alpha
14.46.0.5279 |
Alpha
Engineering Drop; not fully validated |
5279 |
June 04, 2010 |
Alpha
14.46.0.5270 |
Alpha
Engineering Drop; not fully validated |
5270 |
May 21, 2010 |
Alpha
14.46.0.5267 |
Alpha
Engineering Drop; not fully validated |
5267 |
May 07, 2010 |
Alpha
14.46.0.5261 |
Alpha Engineering
Drop; not fully validated |
5261 |
April 23, 2010 |
Alpha
14.46.0.5255 |
Alpha
Engineering Drop; not fully validated |
5255 |
April 08, 2010 |
Alpha
14.46.0.5250 |
Alpha
Engineering Drop; not fully validated |
5250 |
March 19, 2010 |
Alpha 14.46.0.5240 |
Alpha
Engineering Drop; not fully validated |
5240 |
February 25,
2010 |
Pre-Alpha
14.46.0.5233 |
Pre-Alpha
Engineering Drop; not fully validated |
5233 |
February 17,
2010 |
Pre-Alpha
14.46.0.5227 |
Pre-Alpha Engineering
Drop; not fully validated |
5227 |
Intel® HD Graphics Driver
The Intel® HD Graphics Driver contains support for the following Intel Chipsets/Processors:
· 2nd generation Intel® Core™ i3 processor
· 2nd generation Intel® Core™ i5 processor
· 2nd generation Intel® Core™ i5 vPro™ processor
· 2nd generation Intel® Core™ i7 processor
· 2nd generation Intel® Core™ i7 vPro™ processor Intel® Core™ i3 Mobile Processor
· Intel® Core™ i3 Processor
· Intel® Core™ i5 Mobile Processor
· Intel® Core™ i5 Processor
· Intel® Core™ i7 Mobile Processor
· Intel® Pentium® Processor
New Features
Features Added in Baseline
14.46 |
|||
Reference No. |
Description |
Affected Components |
Build |
|
CUI 3.5 |
CUI |
5287 |
|
SGI OpenGL3.0 |
OpenGL |
5287 |
|
Power Conservation for Desktop |
Power Conservation |
5287 |
|
Game Playability Improvements |
D3D |
5287 |
|
Dual Protected Playback |
Media |
5287 |
|
HDMI 1.4 |
Display |
5287 |
|
Audio HW
sample fabrication (Silent Stream) |
Audio |
5287 |
Known Issues
Known Issues in
Build 5361 |
||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
3526414 |
Video display is all black after screen is
rotated. |
Soft BIOS |
Windows Vista*-64 |
Arrandale |
3798492 |
HQV Benchmark FMD tests
will exhibit flickering. |
Media Processing |
Windows* XP-64 |
Sandy Bridge |
Issues Resolved
Issues Resolved in Build 5361 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 4009638 |
When trying to remove a custom resolution, the pop up
message displays information incorrectly. |
CUI |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug
ID: 3799974 |
Frame drop will happen during DVD playback with VMR9. |
GDI |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: NULL pointer reference when comparing current surface with
old locked surface. |
|||||||||||||||||||||
Bug
ID: 3884110 |
Flash of corruption on EFP After Lid Switch |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: When we close the lid switch, the
display port of the current config are disabled. This is followed by enabling of the ports
on the same pipe. However, one of the
ports were already enabled – causing the flash when re-enabled. Fixed the order of enable/disable to avoid
the flash |
|||||||||||||||||||||
Bug
ID: 3886348 |
Clone setting is not restored after Reboot. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Added flags in the persistent
manager to optimize code. |
|||||||||||||||||||||
Bug
ID: 3884771 |
CUI doesn’t restore the 2ndary display profile which was to
the left of Primary. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Initialize Monitors rectangles with
profile data instead of default data.
|
|||||||||||||||||||||
Bug
ID: 3885063 |
Graphics application become black out. |
OpenGL* |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Removed unnecessary drawable lock
in drawable update which was attempting to resolve non existing multisample
buffers. |
|||||||||||||||||||||
Bug
ID: 3885109 |
Secondary display screen is corrputed when running Glaze
app |
OpenGL* |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: After switching from one-display
mode to two-displays mode hDC (which
was obtained by gl server client interface at application start) becomes
invalid |
|||||||||||||||||||||
Bug
ID: 3885209 |
Note Book LCD show garbage when change resolution on
Windows* XP OS |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: LVDS corruption is seen when
reading the scan line register after enabling the port. |
|||||||||||||||||||||
Bug
ID: 3884585 |
LVDS SSC doesn’t work after Gfx driver was loaded. |
Soft BIOS |
Windows* XP Windows Vista* Windows* XP-64 Windows Vista*-64
Windows* 7 |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Fix: Started not enabling clock
bending for LVDS. |
|||||||||||||||||||||
Bug
ID: 4011022 |
Can't playe Cross Fire game with 1280 X 800 |
DirectDraw* |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Drawing Rect from 800x600 to 1280x800
makes gfx memory corrupted |
|||||||||||||||||||||
Bug
ID: 4010713 |
Video frame drop or tearing on Windows* XP 64. |
GDI |
Windows* XP-64 |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: NULL pointer reference when comparing current surface with
old locked surface. |
|||||||||||||||||||||
Bug
ID: 3886227 |
System can not detect DP display after hot dock. - Windows*
XP only |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Incorrect If statement when doing
detection. |
|||||||||||||||||||||
Bug
ID: 3528100 |
Game screen is corrupted when play Labyrinth on 180 degree
rotated mode. |
Rotation |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: When mouse is moved to extreme
right, no pixel of the mouse gets displayed on screen causing the
corruption. To fix, incremented the
X or Y position of mouse when its X or Y position makes the mouse go
completely out of screen. |
|||||||||||||||||||||
Bug
ID: 3886316 |
HDMI Sound output disappear after resuming fron monitor off
in Windows* XP. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Since port is turned off
immendiately after programming audio registers, audio doesn’t work. Fix:
Before internal modeset do not
turn off port at the end of modeset. |
|||||||||||||||||||||
Bug
ID: 3883794 |
(Windows* XP)Black garbage is displayed when movie is
played by WMP9. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Value of sprite plane used was
incorrect. |
|||||||||||||||||||||
Bug
ID: 3885669 |
(Windows* XP)Screen is collapsed in LCD panel after connect
CRT. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: When the scaling options are
customized out from Advanced OS page,
Scaling combo box is still showing up and compensation is set using
invalid values which leads to screen corruption. Fix: Customize out Scaling combo box when
it's empty. |
|||||||||||||||||||||
Bug
ID: 3886396 |
Windows* XP: Some icons disappear if external monitor is
rotated 90/270 degrees |
GDI |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Flush command is being added incorrectly even when there is
no context. |
|||||||||||||||||||||
Bug
ID: 4009705 |
AIO screen blink issue with DP monitor on Windows* XP OS |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Panels issues continuous Hot Plug
Interrupts causing blinking of the VGA display. Added condition for setting
the hot plug so that continuous hotplug interrupts do not get attention
unless actual CRT hotplug is done again. |
|||||||||||||||||||||
Bug
ID: 3885658 |
CUI shows extend mode after undock when connect a DP
monitor and set to extend mode. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Incorrect If statement when doing
detection. |
|||||||||||||||||||||
Bug
ID: 3798856 |
Can't broadcast from HDMI even after setting HDMI audio as
default manually by switching monitor. |
NT - miniport |
Windows* 7 |
Mobile Intel® 4 Series Chipset Family Ironlake Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: When config is changed from from
LFP + HDMI EXTD to Single Display(SD) HDMI, OS issues two modeset calls with
SD call first for LFP and then SD call for HDMI. During the first mode set call,
since HMDI is not a valid display in future config the detection bit is
reset. This causes audio driver to remove the audio end point and application
starts using internal speakers as enumerated by OS as default audio device. Fix: Schedule a timer on the first
mode set which when expires will verify if HDMI is there in end display
config or not. If its not , reset detection bit and HDMI audio end point will
be removed. |
|||||||||||||||||||||
Bug
ID: 3798913 |
On clone mode, could not set refresh rate to 75Hz if
external monitor is set to PRIMARY. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The Dotclock Calculated is truncated when doing conversion from Hz to Khz. As a result, this mode would not be shown in the OS property page . Accounted for the truncation by incrementing the Pixel
Clock. |
|||||||||||||||||||||
Bug
ID: 3883822 |
SDVO-DVI Display Inconsistencies |
Soft BIOS |
Windows* XP Windows* XP-64 |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Panels issues continuous Hot Plug
Interrupts causing blinking of the VGA display. Added condition for setting
the hot plug so that continuous hotplug interrupts do not get attention unless
actual CRT hotplug is done again. |
|||||||||||||||||||||
Bug
ID: 3886350 |
Extended Desktop setting is not restored after Reboot. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Added flags in the persistence manager
code to optimize. |
|||||||||||||||||||||
Bug
ID: 3884329 |
GMA Driver 5237 (Windows* XP) and 2086(Win7) corrupt the
LVDS |
Soft BIOS |
Windows* 7 |
Mobile Intel® 4 Series Chipset Family |
|||||||||||||||||
Root
Cause/Resolution: Incorrect bpc (bits per color)
other than that supported by the panel was being used resulting in
corruption. |
|||||||||||||||||||||
Bug
ID: 3885471 |
Garbage will appear when resolution is changed on 1980x1080
LCD panel. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: LVDS corruption is seen when
reading the scan line register after enabling the port. |
|||||||||||||||||||||
Bug
ID: 4009601 |
HotPlug doesn't work under DOS and Windows* XP. |
NT - miniport |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Flas was set prematurely
preventing further hot plug detection.
As a fix, flag is set after active detection is finished. |
|||||||||||||||||||||
Bug
ID: 3886278 |
When connect monitor and set 1920*1080 resolution 8E BSOD happens. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: A while loop overflow the array
stack. Increased array size to avoid
this. |
|||||||||||||||||||||
Bug
ID: 3885657 |
Screen of unit can't return to LFP only mode after toggle
to EFP only mode and undock. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Active detection was not being
carried out when value is set to true. |
|||||||||||||||||||||
Bug
ID: 3885963 |
BSOD at IGWindows* XPD32.DLL(ErrorCode:0x0000008E) when
running testing on 1GB memory
configuration. |
Direct3D* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Null pointer reference caused BSOD. |
|||||||||||||||||||||
Bug
ID: 3885989 |
DVD Title cannot playback on Windows* XP |
Media Processing |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution:
|
|||||||||||||||||||||
Bug
ID: 3699085 |
Pangya game shows corruption |
Direct3D* |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Changed the pixel shader and
pixel shader constant state if the fog
source channel changes. |
|||||||||||||||||||||
Bug
ID: 3799748 |
Analog monitor blink when move DVD playback window between
primary and seconday monitor. |
NT - miniport |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Hot plug event was handled in all
condition. Modified code to process hot plug only when required. |
|||||||||||||||||||||
Bug
ID: 3800730 |
When playing MPEG on VLC player many drop-frame occur. |
OpenGL* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Optimization made to replace
pixel conversion with memory copy where possible and also to replace the
hardware texture format to match texture internal format |
|||||||||||||||||||||
Bug
ID: 3528099 |
Sometimes screen flashes when select other display device in
CUI under CRT only mode when connect CRT and DP. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Panels issues continuous Hot Plug Interrupts causing blinking
of the VGA display. Added condition for setting the hot plug so that
continuous hotplug interrupts do not get attention unless actual CRT hotplug
is done again. |
|||||||||||||||||||||
Bug
ID: 3883635 |
Panel will shift or flash when change refresh rate in DC
mode with Seamless DRRS enabled. |
Soft BIOS |
Windows* XP Windows Vista* Windows Vista*-64 Windows* 7 |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Made code changes in how the display is programmed based on
horizontal blank width. |
|||||||||||||||||||||
Bug
ID: 3885356 |
Trayicon can be not disabled in INF |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Follow this logic to fix the
issue: 1. Read HKCU registry key
entry first . Put a check there if the “ShowTrayIcon” entry exists. If it exists read it and assign the value
to tray icon check box. 2. If it does
not exist read from HKLM registry
entry and assign the value to tray icon check box. Set the same value for
HKCU also in registry. 3. If it does
not exist in HKLM too set it “1”
(Enabled/checked) which is default value.
|
|||||||||||||||||||||
Bug
ID: 3885470 |
(Windows* XP)BSoD EA when plug/unplug AC adapter in S0. |
Power Conservation |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Code change made to avoid RC6
entry/exit traffic during AC/DC transition.
|
|||||||||||||||||||||
Bug
ID: 4009655 |
Hot undock unit screen will not back to internal when
system is displayed on external only (DP). |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Incorrect If statement when doing
detection. |
|||||||||||||||||||||
Bug
ID: 4009732 |
Screen flash happens when boot up / resume from S3/S4. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: In Windows* XP, the function to get the scaling options is called
with in the function that returns the configuration. This avoids usign the
wrong scaling value. |
|||||||||||||||||||||
Bug
ID: 4011069 |
BSoD when play DVD by WMP |
GDI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Skipped sending commands to check if the HW is idle when
the driver can determine that the HW is idle. |
|||||||||||||||||||||
Issues Resolved in Build 5337 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3800049 |
Notification
balloon cause system lag with WinDVD |
GDI |
Windows* XP |
Sandy
Bridge |
|||||||||||||||||
Root
Cause/Resolution: In cases where the there are complex frames, don’t
set the shader address to NULL until all instances
of video surface are checked. |
|||||||||||||||||||||
Bug
ID: 4009732 |
Screen
flash happens when boot up / resume from S3/S4. |
CUI |
Windows* XP |
Sandy
Bridge |
|||||||||||||||||
Root
Cause/Resolution: While saving persistence data, the scaling value
is not saved properly. The function
that compares current and previous scaling status was pulling persistent data
from the wrong function. This was
causing flashing on sleep resume. |
|||||||||||||||||||||
Bug
ID: 3799779 |
Windows* XP only – System can't remember display mode after
resume from S3 |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Peristence data was not saved
properly. |
|||||||||||||||||||||
Bug
ID: 3886348 |
Clone setting is not restored after Reboot. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Persistence data was not saved
properly |
|||||||||||||||||||||
Bug
ID: 3884585 |
LVDS SSC doesn?t work after Gfx driver was loaded. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Fixed limitation of clock bendign
to only HDMI and added clock bending for LVDS |
|||||||||||||||||||||
Bug
ID: 3884771 |
Position of 2ndary monitor is not restored when choosing
saved profile from CUI |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution:
|
|||||||||||||||||||||
Bug
ID: 3885063 |
Blank out happens on some windows after choosing ‘tile tabs
horizontally’. |
OpenGL* |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: The crash was caused by an attempt
to resolve non existing multisample buffers. Removal of unnecessary drawable
lock fixes problem of windows turning whole black after resize on secondary
display. |
|||||||||||||||||||||
Bug
ID: 3886227 |
System can not detect DP display after hot dock. - Windows*
XP only |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Detection was not completed
properly. |
|||||||||||||||||||||
Bug
ID: 3883794 |
(Windows* XP)Black garbage is displayed when movie is
played by WMP9. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Value of Sprite Plane was wrong;
corrected value is being used now. |
|||||||||||||||||||||
Bug
ID: 3885658 |
CUI shows extend mode after undock when connect a DP
monitor and set to extend mode. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Not doing active detection when variable
to do active detection is set to true. |
|||||||||||||||||||||
Bug
ID: 3886278 |
When connect Samsung HDTV and set 1920*1080 resolution 8E
BSOD happens. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Array was out of bounds resulting
in memory corruption and hence BSOD.
Resolution was to increase the array size. |
|||||||||||||||||||||
Bug
ID: 3886350 |
Extended Desktop setting is not restored after Reboot. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Persistence data was not saved
properly |
|||||||||||||||||||||
Bug
ID: 3885657 |
Screen of unit can't return to LFP only mode after toggle
to EFP only mode and undock. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Not doing active detection when
variable to do active detection is set to true. |
|||||||||||||||||||||
Bug
ID: 3885963 |
BSOD when run SPBEST(including 3D test) on 1GB memory
configuration. |
Direct3D* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Memory allocation failed and null
pointer was not handled properly |
|||||||||||||||||||||
Bug
ID: 3884328 |
Start menu and other applications donot work (sluggish) when
resuming from screen saver |
Power Conservation |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Frame Buffer compression feature
bit not being set after monitor power down and screen saver resume. |
|||||||||||||||||||||
Bug
ID: 3885356 |
Trayicon can not be disabled in INF |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: The current state of the tray
process change is not tracked properly.
There are 4 instances of when it’s changed. The fix is to track the changes
appropriately. |
|||||||||||||||||||||
Bug
ID: 3885470 |
(Windows* XP)BSoD EA when plug/unplug AC adapter in S0. |
Power Conservation |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Continuous reading of Frame
Buffer Compression status register causing lot of traffic during AC/DC
transitions. This hit bad hardware
state leading to hang/infinite loop.
Updated code to read status without caused traffic |
|||||||||||||||||||||
Issues Resolved in Build 5328 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3356935 |
Samsung WXGA panel (and other eDP panels) shows a brief white
flash when resuming from S3. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Gamma register value had some
Garbage values and hence the corruption. |
|||||||||||||||||||||
Bug
ID: 3292217 |
Connect display port to DVI dongle and there is no display
after resume from S3. |
Soft BIOS |
Windows Vista* |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: invalid GMBUS command caused the
failure. Fixed it. |
|||||||||||||||||||||
Bug
ID: 3355732 |
DVD playback by DVD Player corrupts on 1280x800 180 degree rotated
mode (PAL only). |
DirectDraw* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: In 180 degree rotation, when the
overlay surface is in linear memory, the driver was calculating a byte offset
from the start of the overlay surface to the last byte incorrectly. TileX 180 degree rotation worked correctly.
The linear did not. |
|||||||||||||||||||||
Bug
ID: 3356567 |
The error "DisplayDriver stopped" is displayed when
running 3DMark2001 for about 12 hours. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Fixed the memory leak issue in
KCH which was causing the failure. |
|||||||||||||||||||||
Bug
ID: 3356687 |
The color of playback window in Web Camera Application
becomes abnormal after monitor auto off. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Restore CSC config after resume
from monitor turn-off. |
|||||||||||||||||||||
Bug
ID: 3292013 |
Display can not set some resolutions in clone mode. |
NT - miniport |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: For LFP if the mode is not in the
mode list, we recommend native mode. |
|||||||||||||||||||||
Bug
ID: 3292039 |
Opening multiple windows and dragging over other windows
causes issues while using Multiple context application. |
OpenGL* |
Windows* XP |
Mobile Intel® 4 Series Chipset Family Mobile Intel® 965
Express Chipset Family |
|||||||||||||||||
Root
Cause/Resolution: When screen resolution changes,
all the existing drawable objects are invalidated; thus texture corruption is
seen. |
|||||||||||||||||||||
Bug
ID: 3292073 |
The application (user made) doesn't work correctly. |
OpenGL* |
Windows* XP |
Mobile Intel® 4 Series Chipset Family Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Textures corruption problem was solved
by adding notification that texture has been paged out to all contexts
sharing the texture. |
|||||||||||||||||||||
Bug
ID: 3291048 |
Whenever display mode is toggled, LCD shows corruption. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: When switching from a non-VGA to
a VGA plane, the pixel data mask was not set. |
|||||||||||||||||||||
Bug
ID: 3291849 |
Temporary screen corruption happens when change display
mode. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Set Pixel Data Mask was not
executed. |
|||||||||||||||||||||
Bug
ID: 3355968 |
The Camera will become abnormal after desktop rotated to
180 degrees. |
DirectDraw* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: In 180 degree rotation, when the
overlay surface is in linear memory, the driver was calculating a byte offset
from the start of the overlay surface to the last byte incorrectly. TileX 180 degree rotation worked correctly.
The linear did not. |
|||||||||||||||||||||
Bug
ID: 3356094 |
When resolution is changed, LCD shows corruption
momentarily. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: When switching from a non-VGA to
a VGA plane, the pixel data mask was not set. |
|||||||||||||||||||||
Issues Resolved in Build 5323 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3799267 |
System screen corruption during S3 to S4. |
Soft BIOS |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: We should not perform Link training
unless we receive a mode-set from OS. |
|||||||||||||||||||||
Bug
ID: 3883995 |
There is a flickering shadow rectangle when running the
game title Dragon Nest. |
Direct3D* |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: SetRenderTarget to use the format specified
by the application to determine when to override the destination blend
factor. |
|||||||||||||||||||||
Bug
ID: 3883771 |
System can not retain previous scaling setting after FN+F4 through
a full cycle on specific resolutions with an LFP. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes
while switching displays using ACPI Hotkeys we did a compareBasicConfig() before
ApplyConfig() which doesn’t allow Persistence to apply scaling. Instead of doing CompareBasicConfig() do a
CompareWithCurrentConfig(). |
|||||||||||||||||||||
Bug
ID: 3884321 |
Resolution can not remain after a lid switch event. |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes
while switching displays using ACPI Hotkeys we did a compareBasicConfig()
before ApplyConfig() which doesn’t allow Persistence to apply scaling. |
|||||||||||||||||||||
Bug
ID: 3883519 |
VGA singals can't be detected via VGA-to-DVI cable. |
Video BIOS |
Windows* XP None Windows* XP-64 Windows* 7 |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: vBIOS was not detecting the
VGA-DVI cable sometimes during POST. vBIOS was doing the right thing to check
EDID byte14 bit7 (analog/digital) bit to decide which panel it was. Since this
did not work properly with certain monitors which returned digital bit set
with DVI-I connection first time there was a detection issue . |
|||||||||||||||||||||
Bug
ID: 3883888 |
Desktop flashes if open some pictures in 16bit. |
Power Conservation |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Use 32bpp watermark calculation
when calculating 16bpp watermarks and FBC is active. |
|||||||||||||||||||||
Bug
ID: 3884526 |
Splash Screen appears with some backgrounds with maximum
resolution at 16bit. |
Power Conservation |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: Use 32bpp watermark calculation
when calculating 16bpp watermarks and FBC is active. |
|||||||||||||||||||||
Bug
ID: 3884598 |
Can't toggle by Fn+F4 when connect a monitor to dock and
set to extend mode(EFP is primary). |
CUI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes while
switching displays using ACPI Hotkeys we did a compareBasicConfig() before
ApplyConfig() which doesn’t allow Persistence to apply scaling. |
|||||||||||||||||||||
Bug
ID: 3884601 |
Some menu text disappears when disable write combining. |
GDI |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: In function DrvTextOut we call
GHAL_Setup_Blt to set the clipping rectangle and update the ring tail. Updating the ring tail at this
time is the root of this problem. |
|||||||||||||||||||||
Bug
ID: 3698513 |
When Scaling is set to "Maintain Display Scaling"
without clicking "Apply" it is changed to "Scale Full
Screen" after restarting the system. |
NT - miniport |
Windows* XP |
Sandy Bridge |
|||||||||||||||||
Root
Cause/Resolution: When native mode is applied from
CUI, softbios is setting the mode with Maintain Display Scaling as the aspect
option. Then current scaling option for softbios is Maintain Display Scaling
but for miniport it is Full Screen (earlier applied scaling option). This
causes a mismatch across the components which on reboot causes Full Screen
scaling option to be set as registry was not updated on softbios mode set. Query softbios for the current compensation
and update the registry on mode set. |
|||||||||||||||||||||
Bug
ID: 3800150 |
Panel sequence does not meet CMI panel specification when
starting windows. |
Soft BIOS |
Windows* 7-64 Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The PWM should be turned off for
LVDS when VDD is off. |
|||||||||||||||||||||
Bug ID: 3700032 |
Using Dual DVI, optimal resolution balloon notification
erroneously appears. |
CUI |
Windows* 7 |
Mobile Intel® 4 Series Chipset Family |
|||||||||||||||||
Root
Cause/Resolution: Older balloon not fading away in between
switching of Non native and native resolution..non native resolution balloon
pops up but balloon stays for some time if we set native resolution on
subsequent steps. |
|||||||||||||||||||||
Issues Resolved in Build 5321 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3800509 |
Fake EDID does not display monitor name. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: LFP panel name implementation
extended to platforms above Arrandale/Clarkdale. |
|||||||||||||||||||||
Bug
ID: 3883669 |
Exteranl monitor shows garbage when set at 16 bit color
depth in Windows* XP OS |
GDI |
Windows* XP Windows*
XP-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Issue: Instead of storing the tag
of blitter ring we are storing the tag of primary ring. |
|||||||||||||||||||||
Bug
ID: 3801126 |
BSOD with error code 9C when resuming from S4 or from S3 to
S4 with only DP attached. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The port was not getting enabled
when skipping link training for internal settiming calls. The port enabling
was skipped due to wrong return value from
CPTINTDPPORT_GetLinkTrainingPattern(). The
CPTINTDPPORT_GetLinkTrainingPattern() function has been modified similar to
Gen6IntDPPort function. |
|||||||||||||||||||||
Bug
ID: 3800015 |
The Windows Log on password entry screen is not displayed
in DVO-D. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: In case of DP connected...VBIOS
returns DVO for boot preference. We create a UID for HDMI and send it to
miniport on which the modeset happens. Hence the blankout. |
|||||||||||||||||||||
Bug
ID: 3801217 |
Intel control Panel color's parameters cannot maintain when
lid switch. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Hue and sat not applied after
setting these values to default during Lid Switch event. Re-apply Hue and Saturation
values during process of this Event. |
|||||||||||||||||||||
Bug
ID: 3700129 |
Corruption seen in OpenGL* tunnel when resuming from S4 |
OpenGL* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Changed handled WM_BRODCAST
message: instead of handling |
|||||||||||||||||||||
Bug
ID: 3701094 |
BSOD / During gameplay or in the introduction, the video
driver crashes or a BSOD occurs. |
GHAL3D State |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The problem in Battlefield Bad
Company 2 has to do with surface state already freed but the reference to it
in SW context not removed. The fix is to remove the references in SW context after
the surface state's been freed. |
|||||||||||||||||||||
Bug
ID: 3525640 |
The blank screen is displayed during the 2nd part of movie
while playing the Devil May Cry 4 game with DX10 mode. |
GHAL3D State |
Windows |
Arrandale/Clarkdale |
|||||||||||||||||
Root
Cause/Resolution: This problem is an ILK Gfx Hang
while executing 3DPRIMITIVE command: inspecting INSTDONE and INSTDONE1
registers with GfxDebug application reveals that Windower Render Cache and
Data Port do not complete their activities. Does not appear when playing the
game in DirectX9 mode. |
|||||||||||||||||||||
Bug
ID: 3700409 |
Multiwinia- Survival of the Flattest - The game shows
corruption while playing. |
OpenGL* |
Windows |
Arrandale, |
|||||||||||||||||
Root
Cause/Resolution: Corruption occurred after an update of triangle stripification algorithm (at that time a new path was
created for Triangle_Strip_Reverse primitives
processing). The subpath is added for
reversed triangle strips with reordered provoking indices. |
|||||||||||||||||||||
Bug
ID: 3801213 |
Screen will show corruption when desktop is rotated. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: LVDS display power was not off
when disabling LVDS port. |
|||||||||||||||||||||
Bug
ID: 3799747 |
Can not select clone and extended setting in CUI when
connect HP LP2480ZX DVI monitor. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Panel is issuing disconnect and connect
interrupts on mode set. The problem gets solved if on receiving hot plug
interrupt we add 150 ms delay before active detection. This will stabilize
the interrupts. |
|||||||||||||||||||||
Bug
ID: 3801258 |
There is no display on POST/Windows if connected with
monitor on iGFX DVI port. |
Video BIOS |
Windows* XP None Windows* XP-64 Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: For HDMI/DVI displays vBIOS was not
pruning modes properly. |
|||||||||||||||||||||
Bug
ID: 3883771 |
System can not retain previous scaling setting after FN+F4
through a full cycle on specific resolution LFP. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes
while switching displays using ACPI Hotkeys we did a compareBasicConfig()
before ApplyConfig() which doesn’t allow Persistence to apply scaling. Instead of doing
CompareBasicConfig() Do CompareWithCurrentConfig(). |
|||||||||||||||||||||
Bug
ID: 3884321 |
Resolution can not remain after do lid switch. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes while
switching displays using ACPI Hotkeys we did a compareBasicConfig() before
ApplyConfig() which doesn’t allow Persistence to apply scaling. Instead of doing
CompareBasicConfig() Do CompareWithCurrentConfig(). |
|||||||||||||||||||||
Bug
ID: 3800937 |
Can't Change Display or Display Mode using DP-DVI Dongles with
specific system. |
NT - miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Since the device is not being
reported as active in the Get_Child_State Ioctl Os does not prune the mode list.
Though the Rule in event manager for Get_Child_State was properly set to
report the secondary device as active, this was not happening Because there was an Event
ACPI_DOCK added to the event list in between and no corresponding rule added,
thus messing up the init sequence for the Rules. For 14.42 branch the fix is
to call Em_GetNextConfig with SET_SECONDARY as the event instead of
GET_CHILD_STATE. For |
|||||||||||||||||||||
Bug
ID: 3884260 |
FinalFantasy XIV benchmark does not work. |
Direct3D* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Added support for non power of
two cubemaps and textures to 14.46. Same support already existed in main (14.51/Unified). |
|||||||||||||||||||||
Bug
ID: 3800150 |
Panel sequence does not meet CMI panel specification when
starting windows. |
Soft BIOS |
Windows* 7-64 Windows* XP |
Arrandale/Clarkdale |
|||||||||||||||||
Root
Cause/Resolution: Allocated PUCHAR array in the
stack, total EDID_SIZE*4 bytes data. It should have been UCHAR array. Now I am allocating EDID_SIZE bytes in
heap. |
|||||||||||||||||||||
Bug
ID: 3798984 |
No display and unable to set Clone/Ext mode with
Dell2408wfp. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: To reduce the number of flashes
while switching displays using ACPI Hotkeys we did a compareBasicConfig() before
ApplyConfig() which doesn’t allow Persistence to apply scaling. Instead of doing
CompareBasicConfig() Do CompareWithCurrentConfig(). |
|||||||||||||||||||||
Bug
ID: 3801019 |
Some text lines are missing on the LCD. |
GDI |
Windows* XP |
Arrandale/Clarkdale |
|||||||||||||||||
Root
Cause/Resolution: In DrvTextOut there are 3 stages-
As a fix we are not updating the
ring tail on entering the clipping rectangles. A separate function has been
written which is a replica of the function GHAL_Setup_BLT called
GHAL_sSetup_BLT_TextOut which is specifically called from DrvTextOut but it
does not update the ring tail. |
|||||||||||||||||||||
Bug
ID: 3801297 |
LCD has garbage when screen flashes. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Turning off the LVDS Panel before
disabling the LVDS port. |
|||||||||||||||||||||
Bug
ID: 3527343 |
Hang / Far Cry 2 - System Hangs using game and audio
distortion |
3D Application |
Windows* XP-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Surrounded code with #ifndef GHAL3D_WGF
to prevent it from executing in unsupported applications. |
|||||||||||||||||||||
Bug
ID: 3700032 |
Using Dual DVI optimal resolution balloon notification
erroneously appears. |
CUI |
Windows* 7 |
Mobile Intel® 4 Series Chipset Family Arrandale/Clarkdale |
|||||||||||||||||
Root
Cause/Resolution: Root cause was older balloon not
fading away in between switching of Non native and native resolution..non native
resolution balloon pops up but balloon stays for some time if we set native
resolution on subsequent steps. |
|||||||||||||||||||||
Bug
ID: 3701294 |
HDMI monitor is not displayed. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Panel is issuing disconnect and connect
interrupts on mode set. The problem gets solved if on receiving hot plug
interrupt we add 150 ms delay before active detection. This will stabilize
the interrupts. |
|||||||||||||||||||||
Issues Resolved in Build 5313 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3798522 |
Internal LCD's Color Gamma/Contrast Is NOT
Displaying Correctly |
Power Conservation |
Windows* XP |
|
|||||||||||||||||
Root Cause/Resolution: Implemented
new phase in algorithm and enabling software phase-in |
|||||||||||||||||||||
Bug ID: 3799414 |
The Windows Log on password entry screen is not displayed
in DVO-C. |
Soft BIOS |
Windows* XP |
|
|||||||||||||||||
Root Cause/Resolution: In case
of DP connected...VBIOS returns DVO for boot preference. We create a UID for HDMI
and send it to miniport on which the modeset happens. Hence the blankout. In case
of DVO check which is actually connected DP/HDMI |
|||||||||||||||||||||
Bug ID: 3800166 |
Can’t switch expansion mode w/LCD only under DC mode |
Power Conservation |
Windows* XP |
|
|||||||||||||||||
Root Cause/Resolution: This issue happens on static DRRS
and XP only. PC passes the native resolution to Softbios when it requests to change
the refresh rate. Since the current refresh rate is not passed in softbios
does not set the scaling correctly. In previous platforms DRRS had a
restriction of native resolution only. But we don’t have that restriction
anymore so we’ll be passing in current resolution instead of the native
resolution. |
|||||||||||||||||||||
Bug ID: 3701039 |
Rotation for primary display is not applied after
changing the rotation for the secondary display. |
CUI |
Windows* XP |
Arrandale |
|||||||||||||||||
Root Cause/Resolution: In XP we query for
GetRotationAngle to get primary’s rotation angle, however if you see the
corresponding COM code we make EDS
call to get the rotation here we do not take the device id into
consideration, hence when secondary is
at 180, and we query for primary’s rotation angle we get orientation as 2
(180) Instead of calling getrotation
angle use the ddcrotation call itself to query for primary’s rotation. |
|||||||||||||||||||||
Issues Resolved
in Build 5312 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3799310 |
Issues when applying refresh rate 59Hz on DP panel DELL
3008 |
Soft BIOS |
Windows |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Report scaling on all native
modes for a given source mode without checking for the identity RR in the
driver mode table. |
|||||||||||||||||||||
Bug
ID: 3799828 |
Hard lock is seen when placing system into S4. |
Soft BIOS |
Windows* XP |
Auburndale |
|||||||||||||||||
Root
Cause/Resolution: eDP port was getting
enabled twice when enter S4 and the training pattern was in training and not
in progress hence the hard hang. |
|||||||||||||||||||||
Bug
ID: 3799785 |
Screen corruption occurs with resolution change when using
16 bit color depth. |
GDI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Issue: Instead of storing the tag
of blitter ring we are storing the tag of primary ring. |
|||||||||||||||||||||
Bug
ID: 3699650 |
In Extended Desktop DFP + LFP, after unplugging the DP
display, the CUI still detects it. |
NT – miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Rule for CUI_VALIDATE_ADVISE_CONFIG_BOOT
was missing in Mobile_Policy_Data and Desktop_Dual_Pipe_Policy_Data. This was
causing Rule mismatch. Besides the Rule for CUI_VALIDATE_ADVISE_CONFIG was
incorrectly set. |
|||||||||||||||||||||
Bug
ID: 3798822 |
System cannot keep previous mode after a lid switch event. |
NT - miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Rule for
CUI_VALIDATE_ADVISE_CONFIG_BOOT was missing in Mobile_Policy_Data and Desktop_Dual_Pipe_Policy_Data.
This was causing Rule mismatch. Besides the Rule for
CUI_VALIDATE_ADVISE_CONFIG was incorrectly set. Rules have been correctly updated
in both the rule tables. |
|||||||||||||||||||||
Bug
ID: 3799847 |
Hot docking the unit when DOCK has DVI and DP monitor
attached will cause BSOD 0x19. |
NT - miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: HotDockWA was not enabled in SNB
section of inf. Enable the WA in SNB section. |
|||||||||||||||||||||
Bug
ID: 3700559 |
CUI Wizard restarts when you put system in clone mode and
then select a different monitor. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The Boolean values are again being
set when we move to the next page in wizard. • Made the variable as static so
that the value is retained across. • Added an extra flag to check
whether the configuration is applied from wizard. |
|||||||||||||||||||||
Bug
ID: 3798544 |
CUI
in Basic Mode doesn't show different Refresh Rates for DDC. |
CUI |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: Copying all data from primary to secondary
in clone without checking the scenario that is changing from SPSD to DDC. Place a condition for copying
primary RR to secondary. |
|||||||||||||||||||||
Bug
ID: 3526939 |
System
hangs after turning off active DP Display when using port-B and port-C DP
devices. |
SoftBIOS |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: The hang was happening because the
pipe was not getting disabled. On turning off the display, DPCD read fails
and we do not enable the port. |
|||||||||||||||||||||
Issues Resolved
in Build 5307 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3799175 |
"Profile cannot be applied" message displayed
when trying to apply profile |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Hot plug and unplug scenarios are
not taken care in profile selection. |
|||||||||||||||||||||
Bug
ID: 3799413 |
The INF option to define
default display priority for system events doesn't work. |
NT - miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The array bIsPriorityDefined in
GetDisplayPriorityList function was declared to be of size MAX _DISPLAY_TYPES
+ 1 to prevent buffer overflow. |
|||||||||||||||||||||
Bug
ID: 3699493 |
CUI3.5 does not run on .NETFramework 4.0. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Checks for .net 4.0 were missing
in the code. |
|||||||||||||||||||||
Bug
ID: 3527748 |
Far Cry 2 - triangular texture corruption seen on roof and
other objects with |
Direct3D* |
Windows* 7-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Issue where centroid values were not
copied into the pixel shader for unlit pixels. |
|||||||||||||||||||||
Bug
ID: 3798822 |
System cannot keep previous mode after do lid switch. |
NT - miniport |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Rule for
CUI_VALIDATE_ADVISE_CONFIG_BOOT was missing in Mobile_Policy_Data and
Desktop_Dual_Pipe_Policy_Data. This was causing Rule mismatch.. |
|||||||||||||||||||||
Bug
ID: 3527515 |
No confirmation prompt when deleting custom resolution. |
CUI |
Windows |
|
|||||||||||||||||
Root
Cause/Resolution: No confirmation message when user
deletes a custom mode. Added a message box before deletion. |
|||||||||||||||||||||
Issues Resolved
in Build 5305 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3799075 |
After changing resolution and refresh rate window position
is not being retained. |
CUI |
Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: While computing positions in the
monitor2_positionchanged() function the primary in the MonitorControl doesn’t
reflect the latest coordinates. • Set the positions while mode set
is being done in wizardResolutionColorPage. |
|||||||||||||||||||||
Bug
ID: 3699648 |
Corruption is seen on DP panel connected through dongle DP-VGA
after modifying vBIOS. |
Soft BIOS |
Windows |
|
|||||||||||||||||
Root
Cause/Resolution: Expected behaviour. No method to determine whether SSC is
supported for VGA on DP panel. |
|||||||||||||||||||||
Bug
ID: 3701208 |
After reconnecting CRT the profiles stop working. |
CUI |
Windows* 7-64 |
|
|||||||||||||||||
Root
Cause/Resolution: The profiles list is getting re-populated when we hot
unplug and plug the CRT . This happens in the function "GetProfileList()"
in the file Utils.cs in the project gfxSrvc.
This function talks to the driver to get the list , but in this case
its returning NULL for system profiles, after a hot unplug of the CRT. |
|||||||||||||||||||||
Bug
ID: 3528003 |
DX10 - STALKER:CoP - game TDR’s half way into benchmark and
crashes. |
Direct3D* |
Windows* 7-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Improperly handling planes for
HIZ when MSAA is enabled. |
|||||||||||||||||||||
Bug
ID: 3798447 |
TDR occurs on WinDVD and PowerDVD in BD playback. After
several TDR's the app crashes. |
GMM |
Windows |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: Regression issue caused by improperly
handling registry key data. |
|||||||||||||||||||||
Bug
ID: 3699649 |
3DMark 2006 app hangs followed by a driver crash message. |
Direct3D* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Root caused to FBC render target address
valid bit programming sequence issue. |
|||||||||||||||||||||
Bug
ID: 3798790 |
Major Corruption / Direct3D* - Tom Clancy s H.A.W.X. -
Major corruption seen during gameplay. |
Direct3D* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: For DX10.1 during bind time we
should get the blend state information from its corresponding GHAL3D handle
instead of from device context. |
|||||||||||||||||||||
Bug
ID: 3799075 |
After changing resolution and refresh rate, window position
is not being retained. |
CUI |
Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: • Set the positions while mode set
is being done in wizardResolutionColorPage. |
|||||||||||||||||||||
Issues Resolved
in Build 5301 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3699493 |
CUI3.5 does not run on .NETFramework 4.0. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Checks for .net 4.0 are missing in
the code. Added the same. |
|||||||||||||||||||||
Bug
ID: 3699154 |
Latest driver unable to update and will uninstall previous
driver. |
Gfx.Installer |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Delete the .cat files in the packages
and retest. |
|||||||||||||||||||||
Bug
ID: 3701292 |
When playing a movie in a non-Native resolution, LCD
blinks. |
Power Conservation |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: 1) Remove sprite restriction for FBC
enabling. FBC can be enabled along with sprite. |
|||||||||||||||||||||
Bug
ID: 3701203 |
Driver crash during
introduction or in the menu of the game |
Power Conservation |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Root caused to FBC render target
address valid bit programming sequence issue. The driver was invalidating the
register by writing a zero. |
|||||||||||||||||||||
Bug
ID: 3699651 |
Blue Screen after rotate logo.exe application |
OpenGL* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Added/corrected ring tail
allignment/padding that was broken by recent check-in. |
|||||||||||||||||||||
Bug
ID: 3701037 |
CUI 3.0 previous values not restored by clicking Cancel on the
confirmation window |
CUI |
Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: This issue occurs only with CUI
3.0 on ILK not with CUI 3.5 on ILK/SNB. It was fixed in CUI 3.5. Fix ported. |
|||||||||||||||||||||
Issues Resolved
in Build 5298 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3699616 |
Screen will blink when 3DMark2000 is run. |
Direct3D* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Change the logic of SetTileFlags
so that it uses the flag GfxSupportYTiledDepth when ZBUFFER flag is set in
dwCaps. |
|||||||||||||||||||||
Bug
ID: 3699617 |
Application error happen when Final Fantasy XIV Benchmark
run. |
Direct3D* |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Enabled NonPow2 texture support
(2D and cube). |
|||||||||||||||||||||
Bug
ID: 3701292 |
When playing movie in non-Native resolution, LCD shows
blinking |
Power Conservation |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The issue was happening due to FBC
being disabled in an incorrect manner when sprite was enabled. |
|||||||||||||||||||||
Bug
ID: 3701293 |
BSOD when play DVD with WinDVD2010. |
<Unassigned> |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The driver was incorrectly
invalidating the register by writing a zero in the case that the address
valid bit was being updated more than once per context. |
|||||||||||||||||||||
Issues Resolved
in Build 5293 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3526706 |
Display profiles toolbar appears in 'Custom Resolutions'
when switching from Advanced to Basic to Advanced. |
CUI |
Windows |
|
|||||||||||||||||
Root
Cause/Resolution: If the app mode is switched from
Advanced to Basic when the selected sub tab is Custom Resolutions or Monitor
/ TV Settings, the UI is not refreshed. |
|||||||||||||||||||||
Bug
ID: 3699585 |
S4 resume willl have a black screen. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The issue was caused by the display
coming up before the frame buffer was cleared by OS; hence “windows is
resuming screen” appears to be coming up twice. |
|||||||||||||||||||||
Bug
ID: 3698850 |
System will display resume bar again after finish S4
resume. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The issue was caused by display
coming up before frame buffer was cleared by OS hence “windows is resuming screen”
appears to be coming up twice. |
|||||||||||||||||||||
Bug
ID: 3698855 |
LCD screen will flash 2 times when resuming from s4. |
Soft BIOS |
Windows* XP |
Arrandale |
|||||||||||||||||
Root
Cause/Resolution: The issue was caused by display
coming up before frame buffer was cleared by OS; hence “windows is resuming
screen” appears to be coming up twice. |
|||||||||||||||||||||
Bug
ID: 3701094 |
DX9 games: The video driver crashes/BSOD occurs during game
play or during the introduction. |
GHAL3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: This change reorders how the
surface state is released in DX9. |
|||||||||||||||||||||
Issues Resolved
in Build 5287 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug
ID: 3698457 |
Corel WinDVD Pro 2010 causes system to enter a BSOD when playback
is initiated. |
DVD |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Blending params were not set
which caused the issue. |
|||||||||||||||||||||
Bug
ID: 3698786 |
BSOD is seen when boot to OS with 3rd party Gfx card with integrated
Gfx driver installed |
NT – miniport |
Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: Added the logic in miniport to find
out whether Intel's gfx adapter is configured as primary/secondary based upon
PCI config space. |
|||||||||||||||||||||
Bug
ID: 3698445 |
Hot Key Functionality Enabling option had been reflected
directly in Desktop Context menu before Apply the changes. |
CUI |
Windows* 7 |
|
|||||||||||||||||
Root
Cause/Resolution: The registry updating has to be
done during apply only instead at cbEnableHotkeys_Checked and
cbEnableHotkeys_UnChecked of Hotkey functionality . |
|||||||||||||||||||||
Bug
ID: 3358126 |
Turbo will not work after S3/S4. |
Soft
BIOS |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: Check for pHwDev->pACPIMgr == NULL
before dereferencing the pointer. |
|||||||||||||||||||||
Bug
ID: 3526951 |
BSOD
after running Renderstandby_sdkapps.bat. |
GHAL |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: Adding a SW fix in the sync Flush
path. |
|||||||||||||||||||||
Bug
ID: 3699642 |
BSOD occurs during continuous play while playing mpeg2
format. |
Media |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug
ID: 3699111 |
After Saved a profile on ED, changes are not applied when
modifying sliders from CUI_Display_Color Enhancement for primary display. |
CUI |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug
ID: 3527656 |
Game may display video corruption ( |
OGL |
Windows*
XP-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Was not properly populating display buffers with
multisampling feature. |
|||||||||||||||||||||
Bug
ID: 3700548 |
World in Conflict (Soviet Assult) stops rendering, and
displays the EA hang message that driver stopped working normally. |
D3D |
Windows*
XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Issues Resolved
in Build 5283 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3699971 |
GMA950 glShadeModel(GL_FLAT)
bug |
OGL |
Windows Vista* |
|
|||||||||||||||||
Root
Cause/Resolution: For triangle stripification algorithm there is new path created for Triangle_Strip_Reverse processing. One case - vertices are
reordered for RenderTri function calls. Second case (SW): new way
of provoking vertex choosing during calling WriteVertex
for vertices in strip. |
|||||||||||||||||||||
Issues Resolved in
Build 5281 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3698715 |
Battlefield 2
exits when trying to start playing |
D3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Include a mechanism by
which applications can trigger a resolve from a depth buffer to a texture
resource. |
|||||||||||||||||||||
Issues Resolved
in Build 5279 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3527687 |
BSOD/hang may occur during the game play (Call of
Duty: World at War) |
GHAL3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Send
a PIPE_CONTROL with CS Stall before any PIPE_CONTROL with a read cache
invalidate to ensure pipeline is empty before read caches are invalidated. |
|||||||||||||||||||||
Bug ID: 3528161 |
Video may hang while audio and cursor still active
when running SIMS 3 |
D3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Ensure
pipeline is empty before read caches are invalidated |
|||||||||||||||||||||
Bug ID: 3526418 |
BSOD may occur when using WinDVD
and MPEG2 content (ES2) |
DVD |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Blending parameters
were not set. |
|||||||||||||||||||||
Bug ID: 3526564 |
System may intermittently hang/have corruption when
running 3DMark06 |
GHAL3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: Change GHAL3D
private stream data optimization. |
|||||||||||||||||||||
Issues Resolved
in Build 5270 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3525843 |
CRT hot plug may not work
in DOS mode |
Video Bios |
DOS 6.22 |
|
|||||||||||||||||
Root
Cause/Resolution: SNB/CPT hotplug is supported from Video BIOS release 2024. |
|||||||||||||||||||||
Bug ID: 3528158 |
When running Lightsmark 2007 on windowed mode app gets stuck. If you
change between windows you can see app is running on background, but still
gets stuck. |
OGL |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug ID: 3528059 |
The CUI window is not
refreshing, and in some occasions, the window is not completely drawn. |
CUI |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug ID: 3526881 |
The result of log file is
failed after executing Renderstandby_DispCfg.bat |
Power Conservation |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: The RenderStandby_DispConf
app does a back to back read which requires setting Forcewake
and clearing Forcewake. Read order changed to
improve read timing. |
|||||||||||||||||||||
Bug ID: 3526383 |
Image corruption when
using Google Earth. |
D3D |
Windows*
7 |
|
|||||||||||||||||
Root
Cause/Resolution: Implemented a dependency
in SetIndirectStateBindPipelineDirtyFlags function. |
|||||||||||||||||||||
Bug ID: 3526564 |
System may intermittently
hang/have corruption when running 3DMark06. |
GHAL3D |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: GHAL3D private stream data
optimization change. |
|||||||||||||||||||||
Issues Resolved
in Build 5267 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3525843 |
CRT hot plug may not work in DOS
mode. |
Video BIOS |
DOS 6.22 |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug ID: 3526543 |
Audio Silent Stream is failing at sample
rates other than 48, 96 and 192kHz. |
Audio |
Windows* XP |
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Issues Resolved
in Build 5261 |
|||||||||||||||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
|||||||||||||||||
Bug ID: 3357390 |
System
may not boot with 6GB and above memory in Win XP 64 bit |
GDI |
Windows*
XP-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Change the OS allocation
to return only memory allocated greater that 1mb. |
|||||||||||||||||||||
Bug ID: 3357237 |
Embedded
|
|
Windows*
|
|
|||||||||||||||||
Root
Cause/Resolution: |
|||||||||||||||||||||
Bug ID: 3527035 |
Hang
/ “Just Cause” - System hangs after around 3 or 4 minutes of game play |
KMD
Render |
Windows*
XP-64 |
|
|||||||||||||||||
Root
Cause/Resolution: Enable
WaDisableAsyncFlipPerfMode. |
|||||||||||||||||||||